Durr Dental Vector Scaler, Installation And Operating Instructions Manual

Page: 24 / 48

22
9000-615-32/02 1808V002
Usage
Inserting the fluid container
i
Check whether the fluid container is full If
necessary top up the fluid container to the up-
per marking with lukewarm water (approx
30 °C)
i
Insert the fluid container vertically in the cor-
rect position into the unit and press down-
wards until you feel it lock into position
Attach Scaler handpiece
i
Attach the Scaler handpiece to the hose con-
nection
CLEAN
The cleaning process lasts around 10 minutes
During this step
Vector cleaner
cleaning fluid is
pumped through the lines, whereby these are is
cleaned of any deposits
Cleaning can be started whenever required
Once the process is started it runs automatically
until the program is finished
We recommend that cleaning is performed eve-
ry 4 weeks
After an operating time of approx 30 hours the
blue LED on the operating panel lights up to
show that cleaning needs to be performed
The blue LED goes out when the cleaning proc-
ess is completely finished
If the cleaning process is not properly complet-
ed, the blue LED will light up every time the unit
is switched on
PEDAL (flexible foot switch)
Operating the flexible foot switch will activate
the handpiece
If the orange LED lights up, the battery power
must be checked, "154 Inserting or changing
the battery in the flexible foot switch"
If the orange LED flashes then no flexible foot
switch is connected or paired
FUNCTION
If the orange LED lights up, the contact pres-
sure of the instrument is too high or the hand-
piece needs to be checked
10.3 Preparing the device for
treatment
Switch on the unit.
WARNING
Risk of cross contamination
i
All parts must be reprocessed before
every treatment
i
If there has been no treatment for
more than 24 hours then the com-
plete fluid system must be disinfected
i
Switch on the unit
Result:
Blue LED is on – unit is ready for operation
EN