Durr Dental Vector Scaler, Installation And Operating Instructions Manual

Page: 27 / 48

9000-615-32/02 1808V002
25
Usage
–
Scaler instrument P1
, 30 m m, straight, for
the removal of subgingival deposits in deep
gingival pockets (up to 4 mm)
POWER
2 LEDs: 40 % operating performance
P1
– Scaler instrument P2 , 60
m
m, curved right,
for the removal of subgingival deposits
POWER
2–4 LEDs: 40 % - 80 % operating
performance
P2
– Scaler instrument P3 , 60 m m, curved left, for
the removal of subgingival deposits
POWER
2–4 LEDs: 40 % - 80 % operating
performance
P3
i
Hold the instrument at an angle of approx 10°
against the tooth and work away from the
tooth
i
Keep the instrument constantly in motion: in
the longitudinal direction of the tooth or trans-
versely across the approximal surface lingually
or buccally away from the tooth
i
Guide the instrument with minimal pressure in
such a way that the movements of the tip are
always parallel to the tooth surface
i
Make sure that only the side surfaces of the
instruments are used Never use the front or
rear surface of the instruments
i
Perform effective and targeted suction to pro-
vide good visibility of the field of treatment
Application areas
CAUTION
Risk of injury
Accidental activation or uncontrolled ac-
tivities of the handpiece can cause inju-
ries
i
Insert the handpiece in the handpiece
holder when it is not in use
i
Dismantle the instrument or push on
the torque wrench
EN