Durr Dental Vector Scaler, Installation And Operating Instructions Manual

Page: 15 / 48

9000-615-32/02 1808V002
13
7 Installation
7.1 Establishing the electrical
connections
The connection ports are located in the recess
on the rear of the unit
Requirements:
– Correctly installed power outlet in the vicinity
of the unit (max length of mains cable 3 m)
– The plug connection of the power supply is
freely accessible so that it can be quickly dis-
connected in the event of danger
– Mains voltage must match the information
shown on the type plate of the power supply
unit
– The supply voltage of the power supply unit
matches the data on the type plate
i
Plug in the connecting plug of the connecting
cable into the connecting socket of the unit
i
Fit the correct country-specific adapter
i
Plug the mains plug into the power outlet
6 Requirements
The room chosen for installation must satisfy the
following requirements:
– Closed, dry room
– Clean, level and sufficiently stable subsurface
– There should be no large interference fields
present (eg strong magnetic fields) that could
interfere with correct operation of the unit
– The required ambient conditions are satisfied
(refer to the "Technical Data")
Assembly
EN