9000-615-32/02 1808V002
5
Important information
Observe the EMC rules concerning medical
devices
i
The appliance is designed for the use in health
care establishments (in accordance with IEC
60601-1-2) If the appliance is operated in an-
other environment, potential effects on elec-
tromagnetic compatibility must be taken into
account
i
Do not operate the unit in the vicinity of HF
surgical instruments or MRT equipment
i
Maintain a minimum distance of at least 30
cm between the unit and other electronic de-
vices
i
Keep a minimum distance of 30 cm between
the unit and mobile radio devices
i
Note that cable lengths and cable extensions
have effects on electromagnetic compatibility
The following accessories can have an effect on
the electromagnetic compatibility:
Mains cable 9000100846
Flexible foot switch cable 9000-119-130E
NOTICE
Negative effects on the EMC due to
non-authorised accessories
i
Use only Dürr Dental parts or acces-
sories specifically approved by Dürr
Dental
i
If other accessories are used, note
any negative consequences to the
function of the unit
2.7 Only use original parts
i
Only use Dürr Dental parts or accessories and
special accessories specifically approved by
Dürr Dental
i
Only use only original wear parts and replace-
ment parts
Dürr Dental accepts no liability for dam-
ages or injury resulting from the use of
non-approved accessories or optional
accessories, or from the use of non-origi-
nal wear parts or replacement parts
The use of non-approved accessories,
optional accessories or non-genuine
wear parts / replacement parts
(eg mains cable) can have a negative
effect in terms of electrical safety and
EMC
2.4 General safety information
WARNING
Contraindication
Ultrasound vibrations can interfere with
the function of heart pacemakers and
defibrillators
i
Patients with heart pacemakers or de-
fibrillators should not be treated with
these instruments
i
Always comply with the specifications of all
guidelines, laws, and other rules and regula-
tions applicable at the site of operation for the
operation of this unit
i
Check the function and condition of the unit
prior to every use
i
Do not convert or modify the unit
i
Comply with the specifications of the Installa-
tion and Operating Instructions
i
The Installation and Operating Instructions
must be accessible to all operators of the unit
at all times
2.5 Qualified personnel
Operation
Unit operating personnel must ensure safe and
correct handling based on their training and
knowledge
i
Instruct or have every user instructed in han-
dling the unit
Installation and repairs
i
Installation, readjustments, alterations, up-
grades and repairs must be carried out by
Dürr Dental or by qualified personnel specifi-
cally approved and authorized by Dürr Dental
2.6 Electrical safety
i
Comply with all the relevant electrical safety
regulations when working on the unit
i
Never touch the patient and unshielded plug
connections on the device at the same time
i
Replace any damaged cables or plugs imme-
diately
EN
Summary of Contents for Vector Scaler
Page 1: ...EN 1808V002 9000 615 32 02 0297 Installation and operating instructions Vector Scaler ...
Page 2: ......
Page 46: ......
Page 47: ......