DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 7 / 40

About these instructions
Instructions for use DAC eco M-Type - 01.0 - 10/2015 5
Safety Important warnings for the machine operator are specially desig-
nated. Since safety is of particular importance, hazard symbols,
levels of danger and their signal words are described separately
in the chapter
Safety (

S. 9 ).
Orientation If the figure is unclear, indications of right or left are always from
the operator's point of view.
1.3 Other documents
The controller includes components from other manufacturers.
Each manufacturer has performed a hazard assessment for these
purchased parts and confirmed their design compliance with ap-
plicable European and national regulations. The proper use of
these components is described in each manufacturer's instruc-
tions.
1.4 Liability
All information in these instructions were compiled with consider-
ation to the state of the art, and applicable standards and regula-
tions.
Dürkopp Adler cannot be held liable for damages resulting from:
• Breakage and transport damages
• Failure to follow the instructions provided
• Improper use
• Unauthorized modifications to the controller
• Use of untrained personnel
• Use of unapproved replacement parts
Transport
Dürkopp Adler will not be held liable for any damage during trans-
port. Inspect the delivery immediately upon receiving it. Report
any damage to the last transport manager. This applies even if
the packaging is undamaged.
Leave controllers, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.