DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 25 / 40

Operation
Instructions for use DAC eco M-Type - 01.0 - 10/2015 23
Press and hold button S2 to return to sewing mode.
Example for setting the speed
The value is set by pressing the button (button S1 or button S2 ).
The following example assumes an initial value of 3400 rpm :
To set the speed to 1700 rpm (
=
3400 - 1700):
1. Briefly press button S2 17 times (
≙
1700 / 100).

LED S1 flashes once, LED S2 7 times.
2. Press and hold button S1 to confirm input.
5.3.4 Setting the holding force
This function prevents unintended needle movement when the
machine is stopped. You can check whether it is working by turning
the handwheel.
Holding force works when the machine is stopped:
• when stopping during sewing
• at the end of sewing
The effect can be adjusted.
To set the holding force:
1. Briefly press button S1 four times.

LED S1 flashes briefly four times.
2. Press and hold button S1 .

The MESSAGE LED illuminates.
3. Press button S1 repeatedly until the required holding force is
obtained.
Hardware damage due to incorrect setting.
Setting too strong a holding force can overheat the
sewing motor.
Only qualified technicians may make this setting.
CAUTION