DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 23 / 40

Operation
Instructions for use DAC eco M-Type - 01.0 - 10/2015 21
Important
The programming mode has to be activated first.
To activate the programming mode:
1. When switching on the controller press and hold button S1
until the machine beeps a second time.

The MESSAGE LED flashes.
Select the corresponding parameter by briefly pressing button S1 .
The S1 LED indicates which parameter has been preselected
through frequent flashing.
5.3.1 Setting the soft start stitch count
Soft start refers to starting the machine at a slower speed. This
machine function prevents the motor from overheating during long
work processes. After a certain stitch count, the machine runs at
the set soft start speed (

S. 22 ).
You set the stitch count for soft start as follows:
1. Briefly press button S1 once.

LED S1 flashes briefly once.
2. Press and hold button S1 .

The MESSAGE LED illuminates.
3. Press button S1 repeatedly until the required value is
obtained.
You can reduce the value by briefly pressing button S2 .

The value increases or decreases incrementally by one
step.
LED S1 flashes for the tens digit, and LED S2 for the units
digit.
4. Press and hold button S1 to confirm input.
Press and hold button S2 to return to sewing mode.