DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 33 / 40

Troubleshooting
Instructions for use DAC eco M-Type - 01.0 - 10/2015 31
8 Error Sewing motor not
connected • Check the connec-
tion
• Test sewing motor
phases (R = 2.8
Ω
,
high impedance to
PE)
• Replace sewing
motor
• Replace controller
9 Error Sewing motor insula-
tion error • Check motor phase
and PE for low-
impedance connec-
tion
• Replace sewing
motor
10 Error High-voltage error:
Live voltage for
extended period >
290 V • Check line voltage,
if line voltage
exceeds continu-
ously:
• Stabilize or use gen-
erator
11 Error EEprom communica-
tion error • Check machine ID
connection
• Switch off the con-
troller, wait until the
LEDs are off and
then switch on
again
12 Information No valid data on
external
EEprom • Check machine ID
connection
• Switch off the con-
troller, wait until the
LEDs are off and
then switch on
again
• Update the software
13 Error Low voltage warning
(2nd threshold):
Live voltage < 150 V
AC • Check the line volt-
age
• Stabilize the line
voltage
• Use generator
Code Type Description Remedial action