DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 16 / 40

Components and functions
Instructions for use DAC eco M-Type - 01.0 - 10/2015 14
Buttons and functions
4.2 Setpoint device
The setpoint device converts the values from the foot pedal into
voltage values. The setpoint device indicates the speed.
The setpoint device is attached under the frame with a mounting
bracket.
The setpoint device includes:
• a push/pull rod (1) that is connected to the machine foot pedal
through the set of rods.
• a spring preload (2), enabling 3 settings for the push/pull rod
(none, 1/8, or 1/4 rotation)
No. Button Function
Referenc
e
①
S1 Sewing mode
• Select needle stop
position
Programming mode
• Confirm input
• Increase values

S. 19
②
S2 Sewing mode
• Switch on soft start
Programming mode
• Terminate input
• Reduce values

S. 19
③
Potentiometer • Adapt maximum
speed

S. 20