DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 19 / 40

Operation
Instructions for use DAC eco M-Type - 01.0 - 10/2015 17
5 Operation
Operation of the DAC eco M-Type controller is provided exclu-
sively by using buttons S1 and S2 as well as the potentiometer.
You set the foundation for the sewing process with the settings
on the controller.
5.1 Initial start-up
Before initial start-up of the controller, make sure to follow all
information in chapter

3 Safety , S. 9.
Ensure the following:
• Setting the positions (

S. 24 )
5.2 Basic operation
In this section you will learn the basics for working with the con-
troller. These basics are:
• Switching the controller on and off (

S. 17 )
• Using buttons (

S. 19 )
• Using the potentiometer (

S. 20 )
5.2.1 Switching the controller on and off
Important
Before operating the controller, make sure to follow all information
in chapter

3 Safety , S. 9.
CAUTION
Hardware damage due to faulty connection.
An overload is possible due to a faulty connection.
Only qualified technicians may perform the
connection.