DuraTech Industries Haybuster 572 Operating Instructions And Parts Reference Download Page 33

Page: 33 / 160

5 7 2 R O U N D B A L E R

O P E R A T I N G I N S T R U C T I O N S

3.9 Storing the 572 Round Baler

WARNING:

When preparing machine for storage, use normal shut-down procedure.

To prepare the unit for storage, perform the following steps:

1. Clean the machine thoroughly to prevent rust and to make inspections easier.

2. Check for loose or worn chains, belts, sprockets and pulleys.

3. Check condition of the bearings.

4. Coat exposed cylinders rods with grease. Oil chains, lubricate thoroughly according to lubricating

instructions.

5. Place blocks under tires to prevent baler from rolling.

3.10 Removing the 572 Round Baler from storage

To prepare the unit for use after storage, perform the following steps:

1. Remove all protective coverings.

2. Remove blocks from under tires of baler.

3. Follow the pre‑operating instructions. (Section 2)

Summary of Contents for Haybuster 572

































































































































































Search results

Summary of Contents for Haybuster 572

Reviews:

DuraTech Industries Haybuster 572, Operating Instructions And Parts Reference, Page: 33 / 160

Search results

Summary of Contents for Haybuster 572

Reviews: