DuraTech Industries Haybuster 572 Operating Instructions And Parts Reference Download Page 40

Page: 40 / 160

5 7 2 R O U N D B A L E R

O P E R A T I N G I N S T R U C T I O N S

4.14 Belt Installation and Routing

WARNING:

Use normal shut down procedure (Section 3.1) before inspection and cleanout of

material trap.

DANGER:

Engage tailgate lock and install cylinder stop before working on or around baler with

tailgate in raised position.

Install belts with rough top side of belt to outside of machine.

1. Open tailgate.

2. Engage PTO and rotate belts so lacing pin is accessible on worn belt.

3. Engage tailgate lock and install cylinder stop on one of the tailgate cylinders, and on the belt tension

cylinder.

4. Disengage tailgate lock and lower tailgate to remove tension from belts.

5. Engage tailgate lock, shut off tractor and remove key.

6. Split old belt by removing lacing pin.

7. Hook new belt end to old belt.

8. Pull new belt through baler using the old belt.

9. Fasten new belt ends together with new pin.

10. Repeat process for additional belts.

Summary of Contents for Haybuster 572

































































































































































Search results

Summary of Contents for Haybuster 572

Reviews:

DuraTech Industries Haybuster 572, Operating Instructions And Parts Reference, Page: 40 / 160

Search results

Summary of Contents for Haybuster 572

Reviews: