DuraTech Industries Haybuster 572, Operating Instructions And Parts Reference, Page: 12 / 160

2 5 7 2 R O U N D B A L E R O P E R A T I N G I N S T R U C T I O N S
Introduction
The 572 Round Baler is designed to produce round bales.
To avoid possible damage to the machine and risk of injury to the operator, consult with a DuraTech Industries
International, Inc. (DuraTech Industries) representative if you have any questions.
Purpose
The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most
efficient operation of your 572 Round Baler. There is also a trouble shooting section that may help in case of problems
in the field. Any information not covered in this manual may be obtained from your dealer.
Special Note:
When reference is made as to front, rear, left hand, or right hand of this machine, the
reference is always made from standing at the rear end of the machine and looking toward the hitch.
Always use serial number and model number when referring to parts or problems. Please obtain your
serial number and write it below for your future reference.
MODEL: 572 Round Baler SERIAL NO. _______________________
How to use this manual
Manual organization
This manual is organized into the following parts:
• Part 1: Operating Instructions
• Section 1: Safety decals, safety instructions and information
• Section 2: Describes pre-operating procedure.
• Section 3: Describes how to operate the 572 Round Baler.
• Section 4: Describes baler adjustments.
• Section 5: Describes monitor use.
• Section 6 & 7: Describes maintenence of the 572 Round Baler.
• Section 8: Describes the options.
• Part 2: Part’s reference contains diagrams of each assembly, with the part number of each part. A key on
the same or facing page contains a description of the part and the quantity used.