DuraTech Industries Haybuster 572, Operating Instructions And Parts Reference, Page: 46 / 160

36 5 7 2 R O U N D B A L E R O P E R A T I N G I N S T R U C T I O N S
5.4.3 Net wrap setup values
This is the net setup screen. It can be accessed by pushing
button 2 on the menu screen. This screen allows the
operator to setup the parameters for the auto net wrap
function. All settings are adjusted the same as the twine
settings.
5.4.2 Twine setup values
This is the twine setup screen. It can be accessed by
pushing button 1 when on the menu screen. This screen
allows the operator to setup the twine auto tie parameters.
To change a parameter press the corresponding button so
a line appears under the item and use the up and down
arrows to adjust when finished press OK to save all settings
and ESC to return to bale screen.
5.4 Menu Screen
5.4.1 Misc. Setup Screen
This is the misc. setup screen. It can be accessed by
pushing button 3 on the menu screen. This screen allows
the operator to toggle the twine buzzer, backlight, gate
manual or auto and reset the bale size calibration by
pressing the corresponding button. Screen contrast can
be changed by pressing the left and right arrows on each
side of the OK button. Esc takes you back to the main bale
monitor screen.