DuraTech Industries Haybuster 572, Operating Instructions And Parts Reference, Page: 61 / 160

51
5 7 2 R O U N D B A L E R O P E R A T I N G I N S T R U C T I O N S
Section 8: Options
8.1 Net wrap
8.1.1 Loading the net wrap
To load a new roll of net wrap into the machine, first ensure that the PTO is disengaged on the machine and all
movement has stopped. Access the NET WRAP SETUP SCREEN and press LOAD NET WRAP (button #6) to move
the net wrap feed bar into the load position.
Go to the rear of the machine and lift the roll of net onto the rubber coated support rollers and install the net roll guides
into the end of the roll of net wrap. Be sure the roll is oriented so the net will unroll from the back side of the roll. To
thread the net, pull the loose end of the net off the bottom of the roll between the rubber coated support rollers. Pass the
net through the net guide and over the net spreader bar. Pull the net into a bunch and press it between the feed roller and
the feed bar and then under the knife using a tool.
DO NOT insert fingers between the knife and anvil under any circumstances.