DECLARATION OF CONFORMITY
DUPLO CORPORATION, located at 7-6, Izumi-honcho 1-chome, Komae-shi, Tokyo 201-8666, Japan, declares that the
following product,
Name of product :
Sheet Feeder : Model DSF-2000
220–240 V
50/60 Hz
complies with the provisions defined in the regulations listed below.
Regulation : Low Voltage Directive 73 / 23 / EEC under IEC950 2nd (1991) + A1 (1992) + A2 (1993) + A3 (1995) + A4 (1996)
including EN60950 2nd (1992) + A1 (1993) + A2 (1993) + A3 (1995) + A4 (1997) deviations.
Electromagnetic Compatibility Directive 89 / 336 / EEC under EN55011 (1998) + A1 (1999) Class B, EN55014-1
(1993) + A1 (1997) + A2 (1999), EN55014-2 (1997), EN61000-3-2 (1995) + A1/A2 (1998), EN61000-3-3 (1995)
ÜBEREINSTIMMUNGSERKLÄRUNG
Die DUPLO CORPORATION mit Sitz in 7-6, Izumi honcho 1-chome, Komae-shi, Tokyo 201-8666, Japan, versichert, daß das
folgende produkt,
Bezeidhnung des Produkts :
Bogen-Anleger : DSF-2000
220–240 V
50/60 Hz
Entspricht den Bestimmungen, wie sie durch die unten aufgeführten Vorschriften definiert sind.
Vorschriften : EWG – Niederspannungsrichttlinie 73 / 23 / EEC unter IEC950, 2. (1991) + A1 (1992) + A2 (1993) + A3 (1995)
+ A4 (1996) und EN60950, 2. (1992) + A1 (1993) + A2 (1993) + A3 (1995) + A4 (1997) Abweichungen.
Richtlinie für elektromagnetische Kompatibilität 89 / 336 / EEC unter EN55011 (1998) + A1 (1999) Kiasse B,
EN55014-1 (1993) + A1 (1997) + A2 (1999), EN55014-2 (1997), EN61000-3-2 (1995) + A1/A2 (1998),
EN61000-3-3 (1995)
DECLARATION DE CONFORMITE
DUPLO CORPORATION, située à 7-6, Izumi honcho 1-chome, Komae-shi, Tokyo 201-8666, Japon, déclare que le produit
Suivant ;
Nom du produit ;
Alementation Feuille : DSF-2000
220–240 V
50/60 Hz
est conforme aux dispositions définies par les réglementations suivantes ;
Réglementations : Directive sur les basses tensions 73 / 23 EEC d'après IEC950-2 (1991) + A1 (1992) + A2 (1993) + A3 (1995)
+ A4 (1996) et EN60950-2 (1992) + A1 (1993) + A2 (1993) + A3 (1995) + A4 (1997) derogations.
Directive de compatibilité electromagnétique 89 /336 / EEC d'après EN55011 (1998) + A1 (1999) CLASSE
B, EN55014-1 (1993) + A1 (1997) + A2 (1999), EN55014-2 (1997), EN61000-3-2 (1995) + A1/A2 (1998),
EN61000-3-3 (1995)
(Applicable to the 120 V machine)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
