manualshive.com logo in svg

Duplo DSF-2000, Instruction Manual

Share
Download
Duplo DSF-2000 Instruction Manual Download Page 48

45

13. OTHER SETTINGS

The timing for side jogging by the downstream processing unit (side jogging should be performed
after how many sheets it has received from this machine) can be changed within the range of 1 to
5 sheets.
With the default setting, side jogging is performed after every 5 sheets. However if paper is not
aligned properly, set to a smaller number.

Turn the jog dial at the initial screen to display “Other Setting”, and press the jog dial to confirm
the setting.

1

Turn the jog dial to display “Sheet Jog”, and press the jog dial to confirm the setting.

2

Turn the jog dial to display the desired number of sheets at the left edge, and press the jog dial
to confirm the setting.

Remark

: Side jogging will not be performed while a set is being processed when set to “Off”.

3

13-9. Setting of No. of Jogged Sheets

Sheet Jog

Off 1 2 3 4 5

NOTE

: When the DBM-400 Sheet by Sheet is connected, it is necessary to set in the DBM-400 Sheet by Sheet side

whether to use this function. If this unit is set to “Off”, set the DBM-400 Sheet by Sheet also to “OFF”. If
setting this unit to “1” to “5” and using this function, set the DBM-400 Sheet by Sheet to “ON”.

Setting the DBM-400 Sheet by Sheet

q

Press the “Function” key and then “9” key. The following will be displayed on the LCD.

9·Mode Select 2

4·Jog-Asst

OFF

w

Press the “Set” key and then “4” key. The following will be displayed on the LCD.

e

While pressing the “Change” key, press “4” key to switch between ON and OFF.

Summary of Contents for DSF-2000

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands