Dukane 6710UL User Manual Download

Page: 9 / 239

Important Information

viii

WARNING

Do not disassemble the projector.

DO NOT

DISASSEMBLE

• Do not remove or open the projector’s cabinet.
Also, do not modify the projector. There are high voltage areas in the projec-

tor. It may cause fire, electric shock, or laser light leakage, resulting in serious
damage to your eyesight or burns.

Have qualified service personnel perform inspection, adjustments and repairs

of the interior.

Installing suspended from the ceiling

CAUTION

• Should special works be required, for example to suspend the projector from

the ceiling, consult your dealer.

Never try to install the projector yourself in such cases. The projector could

drop and cause injury.

Suspending the projector from the ceiling requires sufficient ceiling strength

to support the projector, and the building standards laws in your particular
country must be followed.

It is also necessary to take measures to prevent the projector from dropping

in anticipation of a malfunction occurring in the projector, ceiling mounting
device and installation location.

• When installed suspended from the ceiling, etc. do not hang from the projec-

tor. The projector could drop and cause injury.

• When installing suspended from the ceiling, use a power outlet that is within

reach so the power cord can be easily plugged and unplugged.

Do not place objects in front of the lens while the projector is
operating.

PROHIBITION

• Do not leave the lens cap on the lens while the projector is operating. The

lens cap could get hot and be warped.

• Do not place objects in front of the lens that obstruct the light while the

projector is operating. The object could get hot and be broken or catch fire.

• The below pictogram indicated on the cabinet means the precaution for

avoiding to place objects in front of the projector lens.

CAUTION

FOR HIGH

TEMPERATURE

Summary of Contents for 6710UL
















































































































































































































































Search results

Summary of Contents for 6710UL

Reviews:

Related manuals for 6710UL

Brands by name

Popular brands

Dukane 6710UL, User Manual

Search results

Summary of Contents for 6710UL

Reviews:

Related manuals for 6710UL

Brands by name

Popular brands