Dukane 6710UL, User Manual

Page: 91 / 239

4. Multi-Screen Projection
67
4-2. Using a single projector to project two types of videos at the same
time [PIP/PICTURE BY PICTURE]
The projector has a feature that allows you to view two different signals simultaneously. You have
two modes: [PIP] mode and [PICTURE BY PICTURE] mode.
The projection video in the first screen display is known as the main display while the projection
video that is called out subsequently is known as the sub-display.
Select the projection function under [DISPLAY]
→
[PIP/PICTURE BY PICTURE]
→
[MODE] in the on-
screen menu (the default factory setting when shipped is [PIP]). (
→
page 111 )
• A single screen is projected when power is turned on.
Picture in Picture function
A small sub-display is displayed inside the main display.
The sub-display can be set up and adjusted as follows. (
→
page 111 , 112 )
• Select whether to display the sub-display at the top right,
top left, bottom right or bottom left of the screen (the
size of the sub-display can be selected and the position
can be fine-tuned)
• Switch the main display with the sub-display
Main Display
Sub-Display
Picture by picture function
Display the main display and sub-display side by side.
The main display and sub-display can be set up and ad-
justed as follows. (
→
page 111 , 112 )
• Selecting the display boundary (ratio) of the main display
and sub-display
• Switch the main display and sub-display
Main Display Sub-Display
Input terminals that can be used for the main screen and sub-screen.
The main screen and sub-screen can provide the following input terminals.
• The main display and sub-display support computer signals up to WUXGA@60HzRB.
Sub-Display or additional display
HDMI1 HDMI2 DisplayPort COMPUTER HDBaseT
Main Display
HDMI1 No Yes Yes Yes Yes
HDMI2 Yes No Yes Yes Yes
DisplayPort Yes Yes No Yes Yes
COMPUTER Yes Yes Yes No Yes
HDBaseT Yes Yes Yes Yes No
NOTE:
• Some signals may not appear depending on the resolution.