Dukane 6710UL User Manual Download

Page: 75 / 239

3. Convenient Features

7. Type in the same combination of

▲▼◀▶

buttons and press the ENTER button.

The confirmation screen will be displayed.

8. Select [YES] and press the ENTER button.

The [SECURITY] function has been enabled.

To turn on the projector when [SECURITY] is enabled:

1. Press the POWER ON button.

The projector will be turned on and display a message to the effect that the projector is locked.

2. Press the MENU button.

3. Type in the correct keyword and press the ENTER button. The projector will display an

image.

NOTE:
• The security disable mode is maintained until the main power is turned off or unplugging the power cord.

Summary of Contents for 6710UL
















































































































































































































































Search results

Summary of Contents for 6710UL

Reviews:

Related manuals for 6710UL

Brands by name

Popular brands

Dukane 6710UL, User Manual

Search results

Summary of Contents for 6710UL

Reviews:

Related manuals for 6710UL

Brands by name

Popular brands