5. Using On-Screen Menu
130
[INSTALLATION(2)]
[SHUTTER SETTINGS]
Enabling and disabling the lens shutter function. You can also set how long the light will take to
fade in and fade out when either the SHUTTER button on the remote control.
POWER ON SHUTTER
OPEN
When the power is turned on, the light source comes on and the picture is projected.
CLOSE
The light source does not come on when the power is turned on.
When the SHUTTER button is pressed, the shutter is released and the light source is
turned on.
PICTURE MUTE SHUTTER OPEN
The light source is still on when the picture is turned off for switching the input
terminals.
CLOSE
The light source turns off when the picture is turned off for switching the input
terminals.
FADE IN TIME
Set how long the light will take to fade in after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
FADE OUT TIME
Set how long the light will take to fade out after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
Using the Reference Lens Memory Function [REF. LENS MEMORY]
This function serves to store the adjusted values common to all input sources when using the [LENS
SHIFT], motorized [ZOOM], and motorized [FOCUS] functions of the projector or the remote control.
The adjusted values stored in memory can be used as a reference to the current.
PROFILE
Select a stored [PROFILE] number.
STORE
Stores the current adjusted values in memory as a reference.
MOVE
Applies the adjusted reference values stored in [STORE] to the current signal.
RESET
Reset selected [PROFILE] number [REF. LENS MEMORY] to the factory default settings.
LOAD BY SIGNAL
When you switch signals the lens will shift to the lens shift, zoom, and focus values for the selected
[PROFILE] number.
If no adjusted values have been saved to [LENS MEMORY], the lens will apply [REF. LENS MEMORY]
adjusted values. Alternatively, if no adjusted values have been saved to [REF. LENS MEMORY], the
unit will return to factory default settings.
FORCED MUTE
To turn off the image during lens shift, select [YES].
• This function is not available for the lens unit NP44ML.
Summary of Contents for 6710UL
Page 1: ...Projector 6710UL 6782UL User s Manual For USA ...
Page 239: ......
