Dukane 6710UL, User Manual

Page: 123 / 239

5. Using On-Screen Menu
99
Adjusting Brightness [LIGHT MODE]
Adjust the brightness of the projector and save it for each input signal.
With the [REF. LIGHT MODE] set to [NORMAL], the adjustment will be valid if the [PICTURE]
→
[MODE]
is set to [PROFESSIONAL]. (
→
page 96 , 128 )
LIGHT ADJUST Brightness can be adjusted in 1% increments from 50 to 100%.
CONSTANT BRIGHTNESS OFF [CONSTANT BRIGHTNESS] mode will be canceled.
ON Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is
selected, the same settings will remain in effect even when the projector is turned
off.
• To re-adjust the brightness, first turn this setting [OFF] before making further
adjustments.
NOTE:
• The [CONSTANT BRIGHTNESS] setting will not be saved for each input signal.
Adjusting White Balance [WHITE BALANCE]
This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level
of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen.
[COLOR CORRECTION]
Corrects the color for all signals.
Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan.
RED HUE + Direction Magenta direction
− Direction Yellow direction
SATURATION + Direction Vivid
− Direction Weak
GREEN HUE + Direction Yellow direction
− Direction Cyan direction
SATURATION + Direction Vivid
− Direction Weak
BLUE HUE + Direction Cyan direction
− Direction Magenta direction
SATURATION + Direction Vivid
− Direction Weak
YELLOW HUE + Direction Red direction
− Direction Green direction
SATURATION + Direction Vivid
− Direction Weak
MAGENTA HUE + Direction Blue direction
− Direction Red direction
SATURATION + Direction Vivid
− Direction Weak