14.4 Exchanging the piping knives
Caution: Danger of injury !
When actuating the cylinders 4 the piping knives move out of the rest
table upwards.
In case of improper handling there is the risk of cutting your fingers
with the sharp blades of the piping knives.
Blunt knives have to be exchanged against a set of knives included in
the accessories. The piping knives can be ordered under the following
order number: 0745 330460
Correction
–
Cut off the compressed air supply.
–
Remove the pick-up folder.
–
Loosen the fastening screws 2 and remove the single
piping stop 3 completely.
–
Loosen the knife fastening screws 1.
–
Push the cylinder to the front end position by hand and take off the
knife 5, if necessary with the help of a pair of tweezers.
–
The new piping knife is mounted in reverse order. The piping knife
must abut on the knife holder 6.
–
Check the end position of the piping knife when retracted
(chapter 14.5).
131
2
3
2
1
4
5
6
