91
E
The side position of the left beam can be corrected using the
screw (1, fig. 78) on the rear side of the headlamp. Turn the
screw clockwise and the beam will shift to the right; turning
the screw anti- clockwise will shift the beam to the left.
The height of the left beam can be corrected using the screw
(2, fig. 78) on the rear side of the headlamp. Turn the screw
clockwise to lower the beam or anticlockwise to raise it.
Repeat the above procedure to adjust the right-hand
headlamp.
Warning
The headlight might fog up if the vehicle is used under
the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
Rear-view mirror adjustment
The rear-view mirror can be adjusted manually by pressing on
point (A).
1
2
fig. 78
A
fig. 79
