86
E
Replacing the high and low beam bulbs
Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in the
“Wiring diagram” paragraph, page 110. Always test the new
bulb before refitting any parts you have removed.
Shown in fig. 72 are the locations of the low beam bulb (LO),
high beam bulb (HI) and parking light bulb (1).
Headlight
To gain access to the left-hand bulb, remove the cover (2) by
pressing the lever (A).
Rotate the locking ring nut (3) of the upper bulb body anti-
clockwise and extract the burnt-out bulb. Replace with a bulb
of equal rating.
On refitting, rotate the locking ring nut (3) clockwise to
secure the bulb in place.
The right-hand bulb is replaced in the same way.
1
LO
HI
fig. 72
3
2
A
fig. 73
