41
E
Entering the code:
on entering this function, the first digit on the left starts
flashing.
Button (1, fig. 8):
each time you press the switch in position B “
▼
”, the
number increases cyclically in steps of one digit every
second;
if you press the button in position A “
▲
“, you will move to
the second digit, which will start to flash. Each time you
press the switch in position B “
▼
”, the number increases
cyclically in steps of one digit every second;
if you press the switch in position A “
▲
”, you can set the
third digit, which will start flashing. Each time you press the
switch in position B “
▼
”, the number increases cyclically in
steps of one digit every second;
if you press the button in position A “
▲
“, you will move to
the fourth digit, which will start to flash. Each time you press
the switch in position B “
▼
”, the number increases cyclically
in steps of one digit every second;
if you press the switch in position A “
▲
”, you can set the
fifth digit, which will start flashing. Each time you press the
switch in position B “
▼
”, the number increases cyclically in
steps of one digit every second;
press in position A “
▲
” to confirm the code.
If the code has been entered correctly, the message CODE
and the code itself will flash simultaneously for 4 seconds.
The “Vehicle diagnosis“ light (9, fig. 4) will turn off; The
instrument panel then automatically exits the menu, thus
allowing “temporary” starting of the motorcycle.
If the error persists, at the next key-on, the instrument panel
will return to an error state and immobilise the engine.
If the code is not entered correctly, the instrument panel
reverts to the “CODE“ menu and display the default
“00000“ code.
