77
E
Checking and topping up coolant level
Check the coolant level in the expansion reservoir on the
right-hand side of the motorcycle. It should be between the
two marks (1) and (2). Mark (2) indicates MAX level; Mark (1)
indicates MIN level.
Top up if the level is below the MIN mark.
Remove the right-hand side fairing (see page 72).
Unscrew the filler plug (3, fig. 61) and add a mixture
consisting of water and antifreeze SHELL Advance Coolant
or Glycoshell (35÷40% of the volume) up to MAX mark.
Refit the filler plug (3) and reassemble all removed parts.
This type of mixture gives the best operating conditions (the
coolant starts to freeze at -20 °C/-4 °F).
Cooling circuit capacity: 2.3
cu. dm
(litres).
Warning
This operation must be carried out with the engine cold
and with the motorcycle vertical and level.
MAX
MIN
3
2
1
fig. 61
