72
E
Main maintenance operations
Removing the fairing
Some parts of the motorcycle fairing have to be removed for
certain maintenance or repair operations.
Warning
If parts that have been removed are not refitted
correctly they may become loose suddenly while riding and
cause you to lose control of your motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws to avoid damage to painted parts
and Plexiglas windscreen of headlight fairing.
Side fairings
To remove the fairings, use the Allen wrench accommodated
under the seat to loosen the following:
the two screws (1) securing the fairing panels to the
brackets;
the six screws (2) securing the fairing panels to the headlight
fairing;
the four screws (3) securing the fairing panels to the frame;
the two screws (4) located under the fairing that join the right
fairing panel to the left fairing panel;
the two screws (5) securing the fairing panels to the oil
cooler;
the two screws (6, fig. 55) securing the front of the fairing to
the headlight fairing.
4
5
1
2
3
fig. 54
