27
E
When the LAP function is set to Off in the menu, the current
“lap“ is not stored.
If the LAP function is active and the display is suddenly
switched off (Key-Off), the LAP function is switched off
automatically (even if the timer was ON, the lap in progress
is not saved).
If the timer is not stopped, when it reaches 99 minutes, 59
seconds and 99 hundredths, it restarts from 0 (zero) and
continues until the function is switched off.
If however the LAP function is switched on and the memory
has not been cleared, but fewer than 30 laps have been
saved (e.g. 18 laps), the display will store any remaining laps
until the memory is full (in this case, it will store an additional
12 laps).
This function only displays lap times once; but other data are
also saved (MAX speed, MAX rpm, rev limiter if reached) for
viewing at a later date in the Lap Memory function.
fig. 20
Press Flash
After 10 secs.
Press Flash
After 10 secs.
