62
E
Once preload has been set as required, tighten the upper ring
nut.
Warning
Use a pin wrench to turn the preload adjusting ring nut.
Take special care when turning the ring nut, to avoid injuring
your hand by striking it violently against other parts of the
motorcycle if the wrench suddenly slips off the nut while
turning.
Warning
The shock absorber is filled with gas under pressure
and may cause severe damage if taken apart by unskilled
persons.
When carrying a passenger and luggage, set the rear shock
absorber spring to proper preload to improve motorcycle
handling and keep safe clearance from the ground. It may
also be necessary to adjust the rebound damping
accordingly.
