15
E
At Key-On, the instrument panel always shows the following
information (de-activating any previously activated
functions):
ODOMETER
AIR TEMPERATURE
CLOCK
SPEED
COOLANT TEMPERATURE
ENGINE RPM
With the switch (1, fig. 8) in position B “
▼
” the Odometer
readout (TOT) will cycle through the following functions:
TRIP A
TRIP B
TRIP FUEL (only if active)
until cycling back to the ODOMETER (TOT) function.
Pressing switch (1, fig.8) in position A “
▲
“ gives access to
the MENU and the following functions are displayed one
after another:
ERROR (only if at least one error is present)
BATT
RPM
LAP (OFF or ON)
LAP MEM
USB (OFF or ON)
ERASE USB
TIME SET
CODE (only if active)
Important
This menu is active only if the speed of the motorcycle
is less than 20 km/h. If this menu is open and the speed of
the motorcycle exceeds 20 km/h, the instrument panel
automatically exits the menu and returns to the initial display.
It is possible to exit the menu at any time, however, by
pressing switch (1, fig. 8) in position A “
▲
” for 3 seconds.
A
B
1
fig. 8
