40
E
Immobilizer override procedure
Should the immobilizer become locked, you can perform the
“Immobilizer Override” procedure from the instrument panel
by entering the respective function as described below.
Enter the menu and go to page “CODE“.
Note
This menu should be active only if there is at least one
immobilizer error.
With this page selected, the initial code is always displayed
as “00000”. If you hold pressed switch (1, fig. 8) in position
B “
▼
“ for 3 seconds, you will access the procedure for
entering the electronic code given on the Code Card.
A
A
A
A
A
B
B
B
B
B
B
B
B
B
fig. 28
B = ON for 3 secs.
Code
OK?
No
Yes
