DSS DVR-SDI Series User Manual Download Page 77

Page: 77 / 171

SDI DVR User’s Manual

6.1.4 Playing Back by Event Search

Purpose:

Play back record files on one or several channels searched out by restricting event type (e.g. alarm input and

motion detection). Channel switch is supported.

Steps:

Enter the playback interface.

Menu>Playback>Event

Select an event type in the Event Type dropdown list.

Note:

Alarm Input type is supported after the alarm module is plugged in.

Check the checkbox of camera number on demand.

Click

Search

button to enter the Search Result interface.

Figure 6. 16 Video Search by Motion

Figure 6. 17 Video Search by Alarm Input

Click

button to enter the Playback interface.

If there is only one channel is triggered by an event, clicking

button takes you to Full-screen

Playback interface of this channel.

Note:

Pre-play and post-play can be configured.

Click

Details

button to view detailed information of the record file, e.g. start time, end time, file size, etc.

Summary of Contents for DVR-SDI Series












































































































































































Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands

DSS DVR-SDI Series, User Manual

Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands