DSS DVR-SDI Series User Manual Download Page 98

Page: 98 / 171

SDI DVR User’s Manual

drives, USB HDDs, and USB writers.

Steps:

Enter Playback interface.

Please refer to

Chapter 6 Playback

During playback, use buttons

and

in the playback toolbar to start or stop clipping record file(s).

Quit Playback interface after finishing clipping and you will then be prompted to save the clips.

Note:

A maximum of 30 clips can be selected for each channel.

Figure 7. 21 Interface of Playback by Time

Click

Yes

to save video clips and enter Export interface, or click

to quit and do not save video clips.

Figure 7. 22 Attention to Video Clip Saving

Export.

Click

Export

button and start backup.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB devices by clicking the

Format

button.

Summary of Contents for DVR-SDI Series












































































































































































Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands

DSS DVR-SDI Series, User Manual

Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands