DSS DVR-SDI Series User Manual Download Page 115

Page: 115 / 171

SDI DVR User’s Manual

115

8.6 Setting Alarm Response Actions

Purpose:

Take alarm response actions will be activated when an alarm or exception occurs, including Full Screen

Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Upload Picture to FTP, Send Email and

Trigger Alarm Output(optional).

Full Screen Monitoring

When an alarm is triggered, the local monitor (HDMI or VGA monitor) display in full screen the video image

from the alarming channel configured for full screen monitoring.

If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an

interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >

Configuration >Live View> Alarm Picture Dwell Time.

Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.

Note:

You must select during “Trigger Channel” settings the channel(s) you want to make full screen

monitoring.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC

installed with Remote Client.

Note:

The alarm signal will be transmitted automatically at detection mode when remote alarm host is

configured. Please refer to

Chapter 9.2.6 Configuring the Remote Alarm Host

for details of alarm host

configuration.

Send Email

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter 9.2.10 Configuring Email

for details of Email configuration.

Trigger Alarm Output

Trigger an alarm output when an alarm is triggered.

Steps:

Enter Alarm Output interface.

Menu> Configuration> Alarm> Alarm Output

Select an alarm output and set alarm name and dwell time. Click

button to set the arming schedule of

alarm output.

Note:

If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going

to Menu> Manual> Alarm.

Summary of Contents for DVR-SDI Series












































































































































































Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands

DSS DVR-SDI Series, User Manual

Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands