DSS DVR-SDI Series, User Manual

Page: 22 / 171

SDI DVR User’s Manual
22
By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2. 1.
Steps:
1. Please select the output resolution, which must be the same with the resolution of the monitor screen.
Figure 2. 1 Resolution Selection
2. The Setup Wizard can walk you through some important settings of the DVR. If you don’t want to use the
Setup Wizard at this time, click the Cancel button. You can also choose to use the Setup Wizard next
time by leaving the “Start wizard when DVR starts?” checkbox in checked status.
Figure 2. 2 Start Wizard Interface
3. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2. 3.
Figure 2. 3 Login Window
4. Enter the admin password. By default, the password is 12345.