DSS DVR-SDI Series User Manual Download Page 90

Page: 90 / 171

SDI DVR User’s Manual

7.1 Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1 Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Check the checkbox of the channel(s) you want to back up and click

Quick Export

button.

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” pops up.

Figure 7. 1 Quick Export Interface

Export.

In the Export interface, choose the backup device and click the

Export

button to start exporting.

Note:

Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup

devices supported by the device.

Figure 7. 2 Quick Export using USB1-1

Stay in the Exporting interface until all record files are being exported.

Summary of Contents for DVR-SDI Series












































































































































































Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands

DSS DVR-SDI Series, User Manual

Search results

Summary of Contents for DVR-SDI Series

Reviews:

Related manuals for DVR-SDI Series

Brands by name

Popular brands