DSE DSE7110 MKII, Operator'S Manual

Page: 58 / 100

Description Of Controls
58
5.5.9 ENGINE DTC (ECU ALARMS)
If the DSE module is connected to an ECU, This page contains active
Diagnostic Trouble Codes
(DTC) only if the engine ECU generating a fault code. These are alarm conditions are detected by
the engine ECU and displayed by the DSE controller.
5.5.9.1 VIEWING ACTIVE ENGINE DTC
To view the engine DTC(s), press both (up) or (down) buttons simultaneously, the
navigation menu is then displayed. Once entered, cycle to the DTC ( ) section and enter.
To view the active DTC(s) alarms, repeatedly press the (up) or (down) buttons until the
LCD screen displays the alarm.
Continue pressing the (up) or (down) buttons to cycle through the alarms.
To exit the active DTC(s) alarm section, press the (up) or (down) buttons
simultaneously to enter the navigation menu. Once entered, cycle to the desired intrunmentation
section.
Check engine
1
1
Low - moderate
458852, 18, 126
SPN 458862
1
1
FMI 0
A list of CAN fault icons can be viewed overleaf.
Icon to indicate that
the event log is
currently display
Number of
DTC displayed
out of number
of active DTCs
Icon to indicate
the type of DTC
fault that is
active
Description and
fault code of
active DTC alarm
SPN and FMI fault
code of active
DTC alarm
Current operating
state of the module