Description Of Controls
61
5.5.10.1 VIEWING THE EVENT LOG
To view the event log, press both
(up) or
(down) buttons simultaneously, the
navigation menu is then displayed. Once entered, cycle to the event log (
) section and enter.
To view the event log, repeatedly press the
(up) or
(down) buttons until the LCD
screen displays the desired event.
Continue pressing the
(up) or
(down) buttons to cycle through the past alarms after
which the display shows the most recent alarm and the cycle begins again.
To exit the event log, press the
(up) or
(down) buttons simultaneously to enter the
navigation menu. Once entered, cycle to the desired intrunmentation section.
23 h
11
50
56 m
Icon to indicate that
the event log is
currently display
Number of
event
displayed out
of 50
Current operating
state of the module
Icon to indicate
the electrical trip
or shutdown
alarm that has
been recorded
The engine hours at
which the event occurred
Summary of Contents for DSE7110 MKII
Page 34: ...Installation 34 4 2 1 DSE7110 MKII TYPICAL WIRING DIAGRAM 3 PHASE 4 WIRE ...
Page 35: ...Installation 35 4 2 2 DSE7120 MKII TYPICAL WIRING DIAGRAM 3 PHASE 4 WIRE ...
Page 36: ...Installation 36 4 3 ALTERNATE TOPOLOGY WIRING DIAGRAMS 4 3 1 GENERATOR ...
Page 37: ...Installation 37 4 3 2 MAINS DSE7120 MKII ONLY ...
