User Manual
Druck DPI620G-IS
22 Feb 2017
116M5464 Revision A
Page 57 of 248
Example Procedure: Measure Current, Internal Loop
Power, CH2
Figure 2-16
shows CH2 set up to measure current (±55mA)
with internal loop power (15V).
Note:
An internal sense resistor (10 ohms) is located
between the ‘mA+/V’ and ‘mA-/COM’ terminals.
Note:
The current limit of the Loop power is 40mA.
Figure 2-16 Measure Current on CH2 with Internal 15V Loop
Power, Range ± 55 mA
1.
Set the applicable software option: CH2, Measure,
Current (15V), mA.
2.
Complete the electrical connections and continue
with the measure or source operation.