FULL USER MANUAL
GANNET 2+ / MAX +
27
26
Pre-Check and Preparation
ATTENTION
1.
1 Check T12 Battery level
2.
Check Postition of the antenna to get better
performance
3.
Make sure the frmware is the latest version.
4.
DO NOT operate under the influence of alchohol
or drugs.
Environment Condition
PAY ATTENTION
Environment Temperature: -10C ~ +55C
Storage Temperature: -25C ~ +70C
Relative Humidity: Do not exceed 85%
Atmospheric pressure: 86kPa ~ 106kPa
Working environment should not contain explosive material or any corrosive or
harmful gas that may cause interference in the operation of the product.
Always work under shelter to prevent rain, snow, wind, sand and dust contamination.
Working Condition Power Supply
PAY ATTENTION
The T10 main unity (ground terminal) uses two pieces of 18650 batteries, and
compatible with the standard micro USB, 5v power adapter (such as mobile
phone, camera and other digital products USB charger) to charge.
In case of smoke, heat or unusual smell during please stop charging the controller
immediately and return to our company for servicing as soon as possible. Do not
leave the product unattended while charging. Do not leave the product in a place
where children can reach.
DO NOT charge when room temperature over 60C
Safety
WARNING
Beginners should pay attention for the following! Please read it carefully!
DO NOT fly under the influence of substances, or when tired!
DO NOT fly in strong wind and or rainy conditions!
DO NOT fly close to electric emissions towers, communication stations and
crowded area!
DO NO fly nearby airports and other prohibited areas!
DO NOT fly around people or animals, or in any location where possible to
damage property.
Check equipment before every flight and carry out maintenance and repairs as
needed.
Use certified chargers to charge the batteries.
DO NOT put unnecessary force on antennas or electronic components to avoid
damage.
Correct Position
Incorrect Position
Pointing up and vertical
DO NOT Put antenna
parellel with the controller
