Features
•
Light weight
•
5 minutes' flying time
•
Support 2 binding modes (automatically and manually)
•
Solid frame and strong protection for blades
•
Fly without adjusting the parameters after binding
•
Support the parameter adjustment and the default value recovery
Binding Procedure
A. Automatic Bind:
1. Create a new Quadcopter model. ( pls refer to the radio manual)
2. Set Channel 5 as ARM( Unlocking switch) and Channel 6 as the switch of ANGLE/HORIZON Mode under the interface of "MIX" on
the transmitter.
3. Turn on the radio ,enter the model. Move the cursor to “Bind”,press ENTER button ,the cursor will flash and the speaker will beep
to remind you that the RF module has entered the Bind mode.
4. Connect the battery to Apus MQ60 V2, wait for about 3s
,
the red LED in the Apus MQ60 V2 will flash, indicating the binding
process is completed. Exit “Bind ” mode and pull the throttle to the lowest place.
5. Power off the Apus MQ60 V2, and Power-on again, if the binding was a success It could able to take off.
B. Manual Bind:
1. Create a new Quadcopter model. ( pls refer to radio manual)
2. Set Channel 5 as ARM( Unlocking switch) and Channel 6 as the switch of ANGLE/HORIZON Mode under the interface of "MIX" on
the transmitter.
3. Turn on the radio, enter the model. Move the cursor to “Bind”, press ENTER button, the cursor will flash and the speaker will beep
to remind you that the RF module has entered the Bind mode. Hold the F/S button on the FC, and power the Apus MQ60 V2
at the same time. The red LED will flash, then power off the Apus MQ60 V2.
4. Exit the radio's “Bind ” mode and pull the throttle to the lowest position.
5. Power up the MQ60 and if the binding was a success it could able to take off.
Note: We have flashed the betaflight firmware before shipping.
Package included
•
1 x Apus MQ60 V2
•
1 x 3.7V 200mAh LiPo battery
•
1x USB charger
•
1x Manual
Note: While using the USB cable (to adjust the parameters) please do not start the motor, it will burn-out the main
board. Please only activate the motors with the battery connected.
Channel Led (Green) CH1-CH8
Band Led (Red) A-F
Band/Channel Button
The green LED for Channel ,the red LED for frequency band.
green LED will skip
one after one
accordingly.
Operating Instructions About VTX
red LED will skip
one after one
accordingly.
Hold the Band/Channel
Instruction manual for Apus MQ60 V2
Disclaimer
Thanks for purchasing Apus MQ60 V2 Mini RC Racing Quadcopter
.
For more information please visit the Apus MQ60 V2 web page at
www.frsky-rc.com which is updated regularly. Product information, technical updates and manual corrections will be available on this
web page. Frsky reserve the rights to update the disclaimer and upgrades product information on the web. Please read the disclaimer
carefully and follow the manual strictly before use. The manufacturer and seller assume no liability for any resulting damage or injury
arising from the operation or use of this product.This product is not suitable for people under the age of 18.Adult supervision is highly
recommended for kids under the age of 18.
Warning and Safety Notes
•
Do not attempt to fly the quadcopter if one or more of propellers are damaged. Flying with damaged propellers is not safe and can
make the quadcopter fly uncontrollably.
•
Always make sure the propellers are installed correctly and mounting screws are securely tightened.
•
Do not use this product in harsh environments(such as winds,rain,lightning,snow,etc)
•
Do not use this product in a strong electromagnetic environment.
•
Do not overcharge or discharge.
•
Do not put the battery into water or fire.
Overview
Body Shell
Power Connector
Camera & Transmiter
Paddle protection seat
Propeller (CCW)
VTC Channel change button
A
B
C
D
E
F
Propeller (CW)
USB Port
Antenna
Frame
Coreless motor
G
H
I
J
K
A
F
C
B
E
D
G
G
D
I
J
K
H
L
Bind Button
L
Specifications
•
Brand Name: FrSky
•
Model name: Apus MQ60 V2
•
Wheelbase: 66.5mm
•
Weight: 20g (Without battery)
•
Size: 84mmx 84mmx58.5mm
•
Flight controller integrated with XM receiver
•
Firmware version: betaflight_3.3.0_frsky (can be upgraded)
•
Motor: 615 coreless
•
Prop Size: 31mm 3 blades props
•
Camera: NTSC 672X492
•
Video Transmitter: 5.8G 26CH 25mW
•
Battery: 3.7V 200mAh 25C LiPo battery
Instruction manual for Apus MQ60 V2
