FULL USER MANUAL
GANNET 2+ / MAX +
41
40
AC/DC Smart Balance Charger
1. Mode Switch
6 Balance Interface
2. Decrease
7 LCD Screen
3. Increase
8. AC Input
4. Start/Confirm
9. DC Input
(for connection to a
5. Main Output
car charging port)
Connection Instructions
1.
The charger can be connected to an AC outlet (100~240V AC) or to a suitable
high-current DC source 11~18V such as a car charging port or cigarette lighter
adapter.
2.
Connect either a LiPo-2S battery or LiHV-4S (HIGH VOLTAGE).
NEVER CHARGE A HiLV-4S (different to a LiHV) BATTERY WITH THIS
CHARGER AS THE HIGH VOLTAGE WILL DAMAGE THE BATTERY AND CAN BE
A FIRE RISK
1.
Before charging, check that the terminals and wires of the battery pack
are not damaged.
2.
When connecting the battery, always check that the positive (red) and
negative (black) wires are connected correctly and the connector plugs
are connected to the same coloured ports on the charger.
3.
In order to avoid short circuits, connect the banana connector cable
to the charger first, then connect the battery. When disconnecting,
disconnect the battery first, then disconnect the charger.
4.
Only one battery can be charged at a time.
These operating instructions are designed to ensure that you quickly become
familiar with its functions. It is therefore important that you read right through
the Operating instructions, Warning and Safety Notes before you attempt to use
your new charger for the first time Gannet Charger integrates battery technology
together with LCD screen.
It is equipped with 4 function buttons. Every operating procedure and status
change can be shown on LCD screen, making the operating procedures very
intuitive. When the battery is working, you can directly check the battery capacity,
battery voltage, charging time and internal resistance on the screen.
Gannet Charger comes with a memory module. Users can edit and save
parameters of different batteries. Once the battery parameters are edited, the
shortcut for parameters will be generated on the screen, which provides a simple
one click interface for users.
Gannet Charger is built-in switching power supply. It can be powered up with 12V
car battery or 100-240V AC input, suitable for use with LiPo / LiFe / LiHV / Li-lon /
NiMH / NiCd / Pb battery.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY NOTES
before you use the charger for the first time. It can be dangerous to mishandle
batteries and battery chargers, as there is always a risk of batteries catching fire
and exploding.
Please read this entire operating manual completely and attentively
before using this product, as it covers a wide range of information on
operating and safety.
