User manual
ELECTRIC IN BUILT OVEN | USA 76
4
And controls the overall apparatus.
Packaging (bags, polyethylene, nails, etc.).
The device itself, immediately after use of the oven or grill due to the heat
generated.
The apparatus itself, when not in use (potentially dangerous parts must be
secure).
Avoid the following:
Touch the appliance with wet parts of the body.
Using the appliance with bare feet.
Pull the cord or unplug it from the electrical outlet.
incorrect or dangerous operations:
Obstructing the ventilation or heat dissipation.
Allow power cords of small appliances come into contact with hot parts of the
appliance. Expose the appliance to atmospheric agents such as rain, or sunlight.
Using the oven for storage purposes.
Using flammable liquids near the appliance.
The use of adapters, multiple sockets and / or extension cords.
Attempting to install or repair the appliance without the assistance of qualified
personnel.
Qualified personnel must be contacted in the following cases:
Installation (following the manufacturer's instructions)
When in doubt the operation of the apparatus.
Replacing the electrical outlet when it is not compatible with the appliance plug.
The temperature probe is a part of the thermostat, if damaged; it should be
replaced by authorized personnel.
Authorized Service Center by the manufacturer should be contacted in the following
cases:
If in doubt about the soundness of the appliance after removing it from its
packaging.
If the power cord is damaged or needs to be replaced.
If the appliance breaks down or malfunctions; ask for original spare parts.
It is a good idea if it meets the following:
Steam cleaners cannot be used to clean the oven.
