User manual
ELECTRIC IN BUILT OVEN | USA 76
39
The oven door is locked
and not released even after
cooling.
Turn the oven on and wait a few
seconds breaker. Turn on the circuit
breaker. The oven should automatically
reset and will operate.
The oven does not heat.
No power in the oven.
Connect the power supply from the
main power supply (fuse box or circuit
breaker). If the condition persists, call
an authorized service center.
Oven mode or selected temperature.
Turn control knobs to select the oven
mode and temperature.
The oven does not cook
evenly
The grill is not in the correct position.
See cooking charts for recommended
grills position.
Convection Bake mode (Convection
Bake)
Always reduce recipe temperature at
25 ° F (15 ° C) when baking the
Convention Bake mode (convection
bake).
The oven light is not
working properly.
The focus is loose or burned.
Change or replace the light bulb if
loose or defective. If you touch the bulb
with your fingers, you can make it burn.
The oven light is on.
The oven door does not close
completely.
Check if the oven door is blocked.
Check if the hinge is bent or the door
switch is broken.
You cannot remove the
lens cover light.
The lens cover is dirty.
It could be accumulation of dirt around
the lens cover. Clean the area of the
lens cover with a dry, clean towel
before attempting to remove it.
The oven is not self
cleaned properly.
The oven was still hot when the
Cleaning (Cleaning) mode is
selected.
Allow the oven to cool before running
self cleaning.
The oven is very dirty.
Always clean the dirt that is loose or
large surplus before running the self-
cleaning. See How to Prepare oven for
self-cleaning.
If the oven is heavily soiled, set oven
for cleaning car 4 hours.
The clock and the timer do
No power in the oven.
Connect the electric supply from the
main power supply (fuse or circuit