User manual
ELECTRIC IN BUILT OVEN | USA 76
38
unfinished in
•
Wrong baking time
•
the cake was tested before time
•
the oven door opened frequently
•
The mold is too large
The cakes are high in the center with cracks at the top
•
High temperature furnace
•
Baking time too long
•
Molds have contact or touch the wall
•
Incorrect grid position
•
Pan size too small
•
The mold is too small
The edges of the crust are very golden pays
•
High temperature furnace
•
The edges of the crust are very thin
FUNCTIONING
PROBLEM
POSSIBLE CAUSE
SOLUTION
F03 or F04 The error
appears on the screen.
A problem has occurred with the
mechanism of insurance.
Turn off power at the main power
supply (fuse box or circuit breakers),
wait a few seconds and turn it on
again. The oven should run an
automatic proof of insurance. If the
condition persists, note the code
number and call an authorized service
center.
F_ another error appears
on the screen.
Turn off power at the main power
supply (fuse box or circuit breaker),
wait a few seconds and turn it on
again. If the condition persists, note the
code number and call an authorized
service center.
The oven display will not
turn on.
Turn off power from the main power
supply (fuse box or circuit breaker).
Turn on the circuit breaker. If the
condition persists, call an authorized
service center.
The cooling fan continues
on after the oven is turned
off.
The furnace components are not
sufficiently cooled.
The fan is turned off automatically
when the electronic components have
cooled sufficiently.
