User manual
ELECTRIC IN BUILT OVEN | USA 76
36
1.
When firmly holding the door, enter the upper arms of both hinges into the slots.
The slits should be hooked on the edges.
2.
Open the oven door.
NOTE:
You should hear a "snap" when the door is in place.
3.
Move the locking hinge on each side back to the locked position.
Four.
Open and close the door to prove that it works properly. Otherwise, repeat the
process of removing the door and replacing it.
5.
Close and slowly open the door to make sure it is placed correctly and firmly.
CHANGING AN OVEN LAMP
NOTE:
Shock Hazard
Make sure the oven and the lamps are cool and the power is off before replacing the
(s) bulb (s).
The lenses must be mounted when the furnace is used. The lenses serve to prevent
bulbs from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so may result in electrical shock, cuts, burns or death.
The oven light is a standard 25-watt bulb (G9) appliance.
IMPORTANT:
Before replacing the bulb, make sure the oven is cool and the
controls are off.
1.
Disconnect power to the main power supply (circuit breaker or fuse box).
2.
Using a Phillips screwdriver remove the screw and remove the cover.
3.
Remove the bulb burned focus.
NOTE:
To avoid damaging or decreasing the life of the new bulb, do not touch it with
bare fingers. Wear cotton gloves or a tissue when you change the focus.
Four.
Replace the bulb and then replace the bulb cover.
5.
Reconnect the electricity from the main power supply (fuse or breaker).
8. PROBLEM SOLVING
First try the solutions suggested here to possibly avoid the cost of a service call.
