Page 7 of 33
J-MINI PRO MANUAL
4
Set Up (no tools are required for assembly)
4.1
Un-boxing
4.2
Inventory the Contents
4.3 Set Up the Machine
4.4 Limitations
Initial Start-Up
1
Cut any exterior strapping, and any
cellophane wrapping and discard
(responsibly)
2
Open the package carefully
3
Separate the contents from the foam
packaging
4
We suggest that you keep the box, if possible,
for at least 60 days
5
Lay out all the components
6
Check them against the above itemization of components and trays
7
Make note of any items that are missing or damaged
8
Contact the DRC Support Team as noted on the laminated worksheet to arrange for
replacements to be sent and possibly a claim request from the carrier. Report any
shortage or damage to [email protected].
9
Set the J-Mini
Pro
on a sturdy table, countertop, or desk
10
The surface should be flat and level
11
J-Mini
Pro
does not identify CZ (Cubic Zirconia) or Moissanite.
12
It is made only to detect laboratory grown diamonds. Nevertheless, both stones can be easily
identified using a hand loupe as both are noticeably doubly refractive.
