Draytek Vigor2960, User Manual

Page: 409 / 446

Vigor2960 Series User’s Guide 401
User Password Type the password for authentication.
Send A Test Mail Click it to send a test mail to the specified address.
Apply
Click this button to save the configuration and exit the web
page.
Cancel Click it to discard the settings configured in this page.
Enter all of the settings and click Apply .
4
4
.
.
1
1
5
5
.
.
5
5
T
T
i
i
m
m
e
e
a
a
n
n
d
d
D
D
a
a
t
t
e
e
This page allows you to specify where the time of the router should be inquired from.
As an NTP (Network Time Protocol) client, the router gets standard time from the time
server. Some time-based functions cannot work properly until the system time functions run
successfully. Typically, NTP achieves high accuracy and reliability with multiple redundant
servers and diverse network paths.
Available parameters are listed as follows:
Item Description
Time Type
NTP – Select to inquire time information from Time Server
on the Internet using assigned protocol.
Browser - Select this option to use the browser time from
the remote administrator PC host as router’s system time.
Server Type the domain name of the server.
Port Type the port number for the time server.
Interval Select a time interval for updating from the NTP server.
Time Zone Select the time zone where the router is located.
Daylight Saving Click Enable to enable the daylight saving. Such feature is
available for certain area.
Apply Click this button to save the configuration and exit the web
page.