Draytek Vigor2960, User Manual

Page: 314 / 446

Vigor2960 Series User’s Guide 306
Local IP/Subnet
Mask Type the IP address and subnet mask of local host.
Remote IP/Subnet
Mask Type the LAN IP address and LAN subnet mask for the
remote host.
Route/NAT Mode Specify the purpose for such profile.
Netbios Naming
Packet Enable – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN Some programs might send multicast packets via VPN
connection.

Enable – Click this button to let multicast packets pass
through the router.

Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
RIP via VPN

Enable – Click it to exchange routing information
packets via VPN connection.

Disable – Disable such function.
5. Fill in the required information on this page and click Finish . Later, a new profile has
been created.